The first time I had to install a new chain was very recently when my the chain snapped on my Honda XLR200 after only having it for about a week. At the same time of replacing the chain I decided...

Changing brake pads on your dirt bike falls under general maintenance and is a skill worth learning. It is easy once you know how and shouldn't take you to long. On top of this you will save...

The process for restoring a plastic gas tank is straight forward a logical but it does take a few hours of hard graft if you are going to do a proper job. I have just restored my plastic tank on...

Installing these vinyl background graphics on the XR started off pretty straight forward, but it turns out I unknowingly chose the easiest panel first. The second panel was a nightmare and I had to...

As part of the XR triple clamp rebuild I replaced the steering bearings, and in this post I will talk about the process of installing the bearing races into the head stock of the bike frame and then...

This post I will be going through what I have done to overhaul my triple clamps, which will include cleaning, replacing the bearings and seals and spraying the bottom clamp to make it look brand new....